Red Star Vietnam Co., Ltd.
Icons giỏ hàng Cart 0
Total : đ

Elmasonic Denta Pro ultrasonic cleaning unit

State: Out of stock
The Elmasonic Denta Pro as variant of the Elmasonic S 30 has been specially developed for the tasks in the dental area. In contrast to the Elmasonic S machine series, preset programs here make the daily work easier and guarantee a standardised cleaning process for each cleaning cycle. For example, the overtemperature protection switches off the heater in good time and prevents the hardening of the blood proteins.
Warranty: No warranty infomation

Price: Contact us

  • Delivery time: 8h00 - 18h00 daily
  • Genuine product, provided width CO, CQ
  • 03 months of free warranty for consumable and accessories
  • 12 months of free warranty for main equipment
  • Accessorie's price is applied only when purchased with
    main equipment
  • Contact us for any particular accessory's quotion
Email: Every day in week

●  Efficient 37 kHz ultrasonic high-performance transducer

●  Cleaning tank made of cavitation-resistant stainless steel

●  User-friendly and clearly arranged operating panel, sealed against water to protect the electronics

●  Perfect application of all cleaning parameters through cleaning programmes, no specific knowledge of operating modes

     such as Sweep, Degas or Boost required

●  Safe and standardized cleaning process in each cleaning cycle

●  Additional key for extreme contaminations or for the cleaning of a very large number of pieces

●  Overheating protection, automatic switch-off at 41°C to prevent the coagulation of the proteins in the blood

●  Additional Sweep mode with modulated frequences for an optimized sound field distribution

●  Degas mode

●  Run dry safe heating

●  LED display to indicate set and actual temperature of the cleaning liquid

●  Removable mains cable with rubber input connector

●  Drain duct for an easy draining of the cleaning liquid on the back of the unit with turning knob on the unit side

●  Ergonomically shaped plastic handles

Mains voltage (Vac) 220 - 240 V
Mains frequency (Hz) 50
Ultrasonic frequency (kHz) 37
Power consumption total Denta Pro (W) 80
Power consumption total Denta Pro H (W) 280
Ultrasonic power effective (W) 80
Ultrasonic power peak max.*(W) 320
Heating power (on H units) (W) 200
Unit outer dimensions W / D / H (mm) 300 / 179 / 214
Tank inside dimensions W / D / H (mm) 240 / 137 / 100
Max. filling level (litre) 2.75
Weight (kg) 3.3
Material tank stainless steel
Material casing stainless steel
Drain duct 3/8“
Protection class IP 20



* Double half wave sound. The form of signal has been matched to the geometry of the tank.

   Due to the form of signal the max. peak ultrasonic power calculates with factor 4.







Each Elmasonic ultrasonic cleaning device has matching covers made of different materials (plastic, transparent plastic or stainless steel).

Plastic covers not only protect against evaporation, but serve also as noise control barriers and drip trays for wet baskets.

Stainless-steel insert covers can accommodate 1-2 glass beakers.


Baskets and Immersion Baskets


Parts and components for cleaning should rest directly on the tank floor, as they could damage the tank or scratch the parts and

components through vibrations caused by the ultrasound.

And the cavitation fields, which are the areas in which the ultrasonic cleaning action takes effect, are not positioned at the bottom

of the tank, but a few centimetres above. This is why Elma offers matching immersion and insert baskets made from either plastic

or stainless steel for the various Elmasonic devices.



Insert Tubs


Hostalen tubs are used to gently clean sensitive gemstones or highly-polished precious metals.

Special acid-resistant tubs made of PP plastic are particularly well suited for parts cleaning and surface processing using aggressive

liquids such as acids. The acid-resistant insert tub is submerged in a water-filled ultrasonic bath and sonicated through the contact liquid (water).

As the acid will not damage the ultrasonic oscillation tank, the device has a long service life.


Glass Jars and Beakers


In order to use cleaning agents efficiently and avoid wasting large quantities where detergents are replaced frequently,

special jars or beakers are frequently used for smaller parts.


Noise Protection Box

Depending on its frequency, ultrasound generates different noise levels within the liquid. We have therefore developed

noise protection boxes for a number of device sizes, which significantly reduce the noise level if the cleaning device is too

noisy at its site, for example, in a doctor's practice or in the lab.


Hot-air Drying Unit


After parts have been cleaned in an ultrasonic bath and rinsed in deionized water, they can be dried quickly using the hot-air dryer.

This completes the professional cleaning process.




We offer holders and bins for jewellery and laboratory applications that are specifically designed for these applications.

Our range includes highly flexible jewellery holders with 10 adjustable hooks for jewellers and design studios.

For lab use, there are device holders, test tube holders, clamps for Erlenmeyer flasks and dental tray holders for full- and half-size DIN trays.


Cooling Coil


Ultrasound will warm up the ultrasonic bath during prolonged operation, and cooling coils are used to maintain a preset temperature.

To increase the cooling effect for larger devices, the coils can be connected in series.




Ultrasonic cleaning devices such as the Elmasonic S 500 would be too tall for table-top operations. To achieve a comfortable height,

we offer an optional frame for the Elmasonic S 500.

  • Đánh giá sản phẩm:

(Xem mã khác)

Hiện tại chưa có ý kiến đánh giá nào về sản phẩm. Hãy là người đầu tiên chia sẻ cảm nhận của bạn.