Red Star Vietnam Co., Ltd.
Icons giỏ hàng Cart 0
Total : đ

LAQUAtwin Salt-11

State: In stock
Complete with meter and sensor, 2 x CR2032 batteries, 1 x 0.5% NaCl & 1 x 5.0% NaCl calibrateing standard solutions (14ml), 1 x conditioning solution (4ml), dropper and operating manual packed in plastic carry-case
Warranty: 12 months


Price: Contact us




Order
  • Delivery time: 8h00 - 18h00 daily
  • Genuine product, provided width CO, CQ
  • 03 months of free warranty for consumable and accessories
  • 12 months of free warranty for main equipment
  • Accessorie's price is applied only when purchased with
    main equipment
  • Contact us for any particular accessory's quotion
Email: info@redstarvietnam.com Every day in week
Đặc điểm

Feature

Robust Titanium Cell resists corrosion. NaCl and seawater cal curves for accurate salinity readings.

 

Applications include:

Agriculture; shrimp farming; food quality control, health management

 

Get accurate direct measurement from a single drop of sample on the unique flat sensor—a result of 60 years of HORIBA’s sensor engineering technology. Select your LAQUAtwin from seven electrochemistry parameters such as pH, conductivity, various ions (Na+, K+, NO3-, Ca2+ ) and salt concentration that best suits your purpose. It’s simple & compact and is your lab-in-your-pocket. Use it wherever and whenever.

 

Quick! No container is
needed to calibrate
or measure. Few
drops of standards
and samples are all
you need.
Variety! Measurements can
be made in different
positions because of
the sensor design.
Anyone! Easy & simple
operation
makes everyone
an expert.
Solution! Discover more
with easy, on-site
measurement.
Wherever! IP67 rated
waterproof. Carry
LAQUAtwin and its
accessories in a
carrying case.
Reliable! HORIBA 60 years
sensor technology
distilled in HORIBA’s
unique flat sensor.
Cost effective 1/100 of standard
solution and
sample volume is
needed. Sensor is
replaceable.
Accurate reading from only a single drop,
in a few seconds
Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all the components into a flat sensor chip that’s less than 1 mm thick pH response membrane KCI gel Approx. 0.8 mm Liquid junction Reference electrode Temperature sensor
 
  • pH, conductivity, ions and salt concentration.
    7 parameters, 11 models.

    Seven water quality parameters are available to suit your requirement, such as pH, conductivity, ion concentration (Na +, K +, NO3 -, Ca 2+ ) and salt concentration. Incorporating the same principle as laboratory sensors, LAQUAtwin provides a reliable and accurate measurement.

     

    Calibrate and measure at the touch of a button – the Smile will tell you when the result can be read

    Easy operation for both the measurement and indispensable calibration procedure. Read the data once a smiley face lights up.

     

    LAQUAtwin is fully waterproof and dustproof(IP67 rated)

    The meter and sensor are fully waterproof so you can take it anywhere anywhere. No worries when water splashes during measurement or cleaning.

     

    Unique measurement options with LAQUAtwin

    One meter provides seven flexible measurement techniques. Simply choose the method that best fits your sample and situation.

     

  • Carrying case comes standard
    for storage & portability

    The compact carrying case contains everything you need for your measurements, including the standard solution. You can attach a strap or tag on the strap hole.

     

Unique measurement options with LAQUAtwin

One meter provides seven flexible measurement techniques. Simply choose the method that best fits your sample and situation.

 

 
  • Drops

    Drop a sample with a pipette; small volumes as 0.1 mL can be measured. Using sampling sheet B, volumes down to 0.05 mL can be tested.

     

  • Immersion

    When you're in the lab, you can test the sample in a beaker. Ensure the sensor guard sliding cap is open.

     

  • Scoop

    Use as a scoop to test water from a river. Vertical scoop is available with a unique sensor guard.

     

  • Wipe

    The sampling sheet allows tiny, trace volumes to be analysed. For example, wipe off the surface of the skin with a sampling sheet soaked with pure water and measure.

 

 
  •  

     

  • Solid samples

    Foods containing some moisture can be tested by placing a small piece directly onto the sensor.

     

  • Powders

    LAQUAtwin meters can also test dry powders. Simply place the powder sample onto the sensor, and add an appropriate amount of pure water.

     

  • Paper, textiles and films

    To test sheets of paper and textiles, cut up the sample into small pieces and place them directly onto the sensor then add a defined amount of pure water.

     

 
Easy measurement for all users
IP67 rated waterproof and dustproof.
Sensor is easily replaceable.
Strap hole Measurement button On/Off button Calibration button Sensor guard (light shield) Battery alarm Stability mark Temperature alarm Voltage measurement mode Measurement value Calibration mark Measurement mark Meter Sensor guard protects sensor.
Integrated slide cap opens for
scooping water samples. Open
the whole sensor guard when
placing water or solid samples
directly on the sensor.
Calibration is complete
when it stops flashing.
Lights up when measurement is complete. Flashes when the temperature is out of range. Displays sensor voltage. Flashes when the measurement
value is out of the range.
Measurement is complete
when it stops flashing.
IP67 rated waterproof and dustproof. You can attach a strap or tag here. Press when ready to
measure and for auto-hold.
Automatic calibration is
easy with this button.
MODEL Salt-11
Measurement principle 2 AC bipolar method
Minimum sample volume 0.12mL
Salinity range 100.0 ppt*1 (0% to 10.00%)
Range and resolution (Valid digits)

0.0 to 100.0 ppt: 0.1 ppt

(0.00 to 10.00%: 0.01%)

Calibration Up to two-point
Accuracy *2

±2% full scale (0.0 to 9.9 ppt)

±4% full scale (10.0 to 100.0 ppt)

Temperature Display 0 - 50.0°C
Display Custom (monochrome) digital LCD
Operating temperature/humidity 5 to 40˚C, 85% or less in relative humidity  (no condensation)
Power CR2032 batteries (x2)
Battery life Approx. 400 hours in continuous use
Outer dimensions / Mass 164mm × 29mm × 20mm  (excluding projections) / Approx. 50 g (meter only, without batteries)

 

*1 ppt: parts per thousand


*2 Accuracy is the closeness of agreement between measured value and actual value of the standard solution

in the measurement of the same standard solution as the one used for the calibration. The temperature during

the calibration and measurement is the same. The error of standard solutions and rounding error (±1 digit) are not included.


*3 IP67: no failure when immersed in water at a depth of 1 meter for 30 minutes
Please note that the meter cannot be used underwater.

 

One meter, six methods *1.

Only the LAQUAtwin range allows you to be this flexible! Choose the best method according to your sample, your situation and your needs.

*1 B-771 (conductivity) cannot be tested in solids or powders.

 

Immersion

When you’re in the lab, you can test the sample in a beaker. Ensure the sensor guard sliding cap is open.

 

Scoop

Use as a scoop to test water, for example from a river.

 

Drops

LAQUAtwin meters can measure sample volumes as low as 0.05 mL*2. Place a drop of the sample onto the sensor with a pipette.


*2 Using the HORIBA sampling sheet, volumes down to 0.05 mL can be tested (except for conductivity measurements).

 

Solid Samples

Foods containing some moisture can be tested by placing a small piece directly onto the sensor.

 

Powders

LAQUAtwin meters can also test dry powders. Simply place the powder sample onto the sensor, and drop on your defined volume of pure water.

 

Paper and Textiles

To test sheets of paper and textiles, cut up the sample into small pieces and place directly onto the sensor. Drop on your defined volume of pure water.

 

 

LAQUAtwin Debut! 

 

 

 

Hướng dẫn hiệu chuẩn

 

 

 

Hướng dẫn sử dụng

 

 

 

Hướng dẫn làm sạch bút đo Horiba LaquaTwin sau khi sử dụng 

  • Đánh giá sản phẩm:

(Xem mã khác)

One meter, six methods *1.

Only the LAQUAtwin range allows you to be this flexible! Choose the best method according to your sample, your situation and your needs.

*1 B-771 (conductivity) cannot be tested in solids or powders.

 

Immersion

When you’re in the lab, you can test the sample in a beaker. Ensure the sensor guard sliding cap is open.

 

Scoop

Use as a scoop to test water, for example from a river.

 

Drops

LAQUAtwin meters can measure sample volumes as low as 0.05 mL*2. Place a drop of the sample onto the sensor with a pipette.


*2 Using the HORIBA sampling sheet, volumes down to 0.05 mL can be tested (except for conductivity measurements).

 

Solid Samples

Foods containing some moisture can be tested by placing a small piece directly onto the sensor.

 

Powders

LAQUAtwin meters can also test dry powders. Simply place the powder sample onto the sensor, and drop on your defined volume of pure water.

 

Paper and Textiles

To test sheets of paper and textiles, cut up the sample into small pieces and place directly onto the sensor. Drop on your defined volume of pure water.

 

 

LAQUAtwin Debut! 

 

 

 

Hướng dẫn hiệu chuẩn

 

 

 

Hướng dẫn sử dụng

 

 

 

Hướng dẫn làm sạch bút đo Horiba LaquaTwin sau khi sử dụng